Portable Meltblown Test Equipment for Particulate Filtration Efficiency and Resistance Testing (SC-MBT-2032)

• Test Flow: 32 L/Min
• Flow Meter Accuracy: ±3%
• Pressure Gauge Accuracy: 1PA
• Detector: Laser Particle Counter
• Dimension: 300*250*360mm
• Transport Package: Carton Package
• Model NO.: SC-MBT-2032
• Trademark: Scince
• Origin: Suzhou, China
• Production Capacity: 2000sets/Year

Product Description

Portable Meltblown Test  Equipment for Particulate Filtration Efficiency and Resistance Testing  SC-MBT-2032

Application

This instrument is used to quickly detect the filtration efficiency and resistance of melt-blown, flat masks at 32L/min flow rate.

Technical Parameters
 

Technical  Data  Sheet
Item	Parameter
Test flow	32L/min
Test area	100 cm2
Test particle size	0.3μm
Flow meter accuracy	±3%
Pressure gauge accuracy	1Pa
Aerosol	Paticulates in the air
Detector	Laser particle counter
Power supply	AC220V, 50 or 60 Hz, can be customize
Dimension	300mm*250mm*360mm

Product Pictures
 




Features

1. Ambient air is used as the detection medium, calibration filter paper is provided, and the filtration efficiency of 0.3 micron NaCl particles under standard conditions is obtained by adjusting the balance coefficient.
 
2. Used for relative comparison, not absolute judgment. As a non-standard test equipment, environmental impact may affect the test results. Therefore, the best use of this portable instrument is for the relative comparison of melt-blown materials, rather than the absolute value of the test results as the basis for judgment.
 
3. At the same time, in order to achieve the accuracy of the absolute value of the test result as much as possible, the instrument is designed with balanced correction, which is used to correct the absolute value of the test result in order to be closer to the standard instrument.

4. The resistance (Pa) of the test result is not affected by the environment, and the test result can be compared with the standard instrument.

5. This instrument can be used as a resistance tester for semi-finished products of melt-blown plants, and can also be used as a product uniformity testing device in product control of melt-blown plants. The cost is low and the operation is easy.






1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.

2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.

3. What is your terms of payment?
Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.

4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.

5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.

6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for small fee.

7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. Only accessories and corresponding shipping charges will be charged out of the warranty period.

8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.