Basic Info.
After-sales Service
1 Year
Measuring Principledetection Principle
Electrochemistry (Honeywell, USA)
Measuring Range
0-1, 0-10, 0-100 (Special Range Can Be Customized)
Discrimination Rate
0.001/0.01/0.1/1
Zero Drift
≤ 1% (Fs/Year)
Response Time
≤20 Seconds (T90)
Dimensions
180mm*140mm*92mm
Transport Package
Wooden Package
Product Description
Gas Alarm System for Detection of Flammable or Toxic Gas Leaks in Industrial Environments
Product Profile AQMS-02 Gas Alarm System adopts imported intelligent gas sensor with high sensitivity and precision. The product is used to detect the leakage of combustible or toxic gases in industrial environment. The whole detector adopts flameproof structure to ensure safety.AdvantagesImported high-performance sensors have high measurement accuracy, good repeatability and long service life.Adopt independent 16-bit AD chip and 4-layer circuit board design, which has stronger anti-interference ability.The units of mg/m3, ppm, VOL and LEL can be selected.The embedded 32-bit ultra-low power processor is adopted, and the response speed is fast.Automatic protection against high concentration gas.It has the function of restoring factory settings to prevent misoperation.The instrument is equipped with infrared remote controller, which is easy and convenient to operate without opening the cover.Three-wire 4-20mA, RS485 signal output optional, relay output.The explosion-proof grade is Exd II CT6, certified by the national explosion-proof electrical inspection center.ApplicationsPetroleum and petrochemical, metallurgy, environmental protection, gas, fire protection, municipal administration, chemical industry, shipping, electric power, process control, sewage treatment, emergency rescue monitoring and other industries.Technical ParametersDetection principle | Electrochemistry (Honeywell, USA) |
Measuring range | 0-1, 0-10, 0-100 (special range can be customized) |
Unit | mg/m3 |
Discrimination rate | 0.001,0.01,0.1,1 |
Sampling mode | Free diffusion type, online continuous detection |
Indication error | ≤±3% FS |
Repeatability | ≤±1% |
zero drift | ≤ 1% (fs/year) |
Response time | ≤20 seconds (T90), (higher requirement depends on sensor performance) |
Power supply source | 12-30V DC |
Power | ≤2.5 W(DC24V) |
Ambient pressure | 80kPa-120kPa |
Ambient temperature | -20ºC-+60ºC (typical value), -40ºC-+80ºC (limit value) |
Ambient humidity | 10%-95%RH (without condensation) |
Explosion proof sign | Ex d II CT6 |
Protection grades | IP66 |
Dimensions | 180mm*140mm*92mm (height * width * thickness) |
Weight | About 1.6Kg (aluminum alloy shell) |
1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.
2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.
3. What is your terms of payment?
Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.
4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.
5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.
6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for small fee.
7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. Only accessories and corresponding shipping charges will be charged out of the warranty period.
8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.
Address:
No. 2, Lushan Road, Huangdao District, Qingdao City, China
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Textile, Tools & Hardware
Company Introduction:
Scince Purge Technology (Qingdao) Co., Ltd (SCPUR) is a technology company with cross-industry practical experiences. For 25 years, SCPUR has defined the market in purification industries in micro-controller integrated system. With more than 20 years design and manufacture experience in air filtering and separation (including filter tester machine and respirator tester), testers supplied by SCPUR have the core advantages of easy controlling, powerful function and stable performance.
Oriented by the market, SCPUR set technical strength as its core competitiveness, could provide customerized services in filtering and separating test field. Through abundance experience in filter medium and mask industries, SCPUR could also provide filter material related products and services.
SCPUR products include three categories: Filter testers series, material series, clean room equipments and etc. Our main products including Automatic Filter Tester, Respirator Ex&Inhalation Resistance Tester, General Ventilation Filter Test System and Automatic Scanning Test System for HEPA filters, etc.
The staff of SCPUR are recognized for their integrity, technical power and products quality, and continue to use our enthusiasm and professional knowledge to provide high-quality services and drive the development of innovative products.