VOCs On-line Monitoring Syste
Product Profile
AQMS-09 Factory Boundary VOCs On-line Monitoring System is installed at the entrance and exit of the closed production workshop and around the open production equipment, and continuously monitors the VOC gas emitted by unorganized, and passes the concentration of volatile organic compounds in the air through wireless transmission to the central control room, and transmitted to the management department by data transmission.
Advantages
Imported high-performance British PID sensor with good stability and repeatability.
It is suitable for efficient and rapid water removal and can be used online for a long time.
Many units such as mg/m3, ppm, ppb and pphb can be selected.
Equipped with large-capacity battery to ensure continuous operation for 6h after power failure.
DTU short message signal transmission mode can connect with environmental protection platform.
Seamless docking system platform, the host computer system realizes diversified operation.
The vertical pole is installed independently, without debugging, and it is directly powered on to use.
Built in independent memory, realize continuous 24-hour data storage.
Applications
The entrance and exit of the closed production workshop and around the open production equipment.
Technical Parameters
| Measuring principle |
PID |
| Measuring gas |
Volatile organic compounds (VOCs) |
| Measuring range |
0-1ppm, 20ppm, 50ppm, 200ppm, 0-5mg / m3, 0-20mg / m3, 0-100mg / m3(optional, range not listed can be customized) |
| Repeatability |
±2% |
| Accuracy |
±3%F.S |
| Discrimination rate |
0.001ppm ,0.01ppm,0.1ppm,1ppm,0.01 mg/m3,0.1 mg/m3,1 mg/m3 |
| Response time |
T90 < 20 s |
| Working temperature |
-20 ºC - + 60 ºC (customized for special requirements) |
| Working humidity |
≤95%RH, no condensation (humidity > 90%RH, condensation can be equipped with filter) |
1. Are you a trading company or manufacturer?
we are a professional tester manufacturer with 25 years of industry experience. Our factory is located in Suzhou, where is only 100 kilometers far away from Shanghai Hongqiao International Airport. It is pretty convenient for you to make a visit.
2. What is the L/T?
The lead time will be between15 and 30 days after deposit payment. If there is stock for the instrument you want, timely shipment will be arranged within 7 days.
3. What is your terms of payment?
Based on our sales policy, T/T 30% as deposit should be paid before order, and 70% balance payment should be completed before shipment. We will provide you with real photos or video of the instrument before balance payment.
4. What is your terms of delivery?
Available in EXW, FOB, CFR and CIF.
5. What is your packing for the tester?
Generally, packed with wooden case. We can do some adjustments in terms of your special requirement.
6. Can the mask tester be certified?
There is certification requirements for mask only, and there has no relevant certification requirements for mask tester, but a calibration report is required. we will provide a calibration report with a randomizer for our mask test instrument. The calibration report is valid for one year. After then, we can also support the corresponding calibration service for small fee.
7. Do you have after-sales service?
We can provide on-site installation and commissioning service for you, but you need to bear the travel expense of our engineer. The warranty period will be one year. Free replacement parts will be supplied during this period. Only accessories and corresponding shipping charges will be charged out of the warranty period.
8. Is there an English interface for your instrument?
Our instrument can be customized on the base of your demand. For example, both mask tester and filter material tester can be displayed in Chinese, English and Korean interfaces. The instruction manual is available in both Chinese and English.
Advantages
){kind=link}
){kind=link}